Hanwha Phasor Logo

Interoperable, ultra-low profile, high-gain satcom on the move


Analogue/RF Hardware Engineer

We have an exciting opportunity for a bright, passionate and innovative Analogue/RF Hardware Engineer to complement the existing design team playing a significant part in the development of a novel phased array antenna system for the aerospace markets. The successful candidate will be part of a dynamic London-based technology company developing and delivering complex and innovative products into the aerospace, maritime and land mobile industries.

Your role will be required to design the hardware sub-assemblies for the next generation of Ku/Ka multi-gigahertz RF Antenna Boards, specifically RF, Analogue and mixed signal boards, whilst contributing to the wider system architecture. You will be a part of a multidisciplinary team working with ASIC, Antenna, Mechanical, Manufacturing and Product Engineers across a range of technologies.

Look up and lock on to a bigger future, fast

As the original disruptors in solid-state satcom-on-the-move antenna, Hanwha Phasor is rewriting the book on phased arrays. It’s one of the toughest challenges in satcom. And, so far, we are the only team to demo multi-axis capability in real world conditions.

Now we’re closing in our goal: active electronically-steered antennas (AESA) for super-fast, super-reliable connectivity—GEO, of course, but LEO, MEO and HEO too.

Our inventive combination of digital and analogue architectures enables highest performance gain for lowest power and lowest profile, while our modular approach enables configurable apertures for the full range of enterprise customers on the move – in the air, on land or at sea.

Backed by Hanwha Systems, the Korean technology giant with a growing presence in global satcom, we are attracting formidable partners: we have appointed a world-class, global manufacturing partner, and two of the world’s best FABs are working on our chips.

So, what does that mean for you? All the fast-paced opportunity you’d expect from a challenger, plus the systems, processes and investment you’d want from an established industry leader.

Technical responsibilities

  • As a member of the hardware development team, your role will be to design, verify, commission and productise board-level hardware designs for Hanwha’s Phased Array Antenna products.
  • You will strengthen the existing team with a background in Analogue and RF electronic circuit design to arrive at a level of excellence for product development and cost-effective designs.
  • To take ownership of hardware designs from requirements, hardware specifications, schematic entry though to PCB layout, commissioning, verification and supporting integration into platforms.
  • Perform design calculations and RF/Analogue simulations using industry standard tools in order to estimate performance, identify high-risk areas and ensure reliable designs.
  • Conduct hardware design reviews when appropriate to ensure quality designs.
  • Collaborate with the other members of the hardware, software, systems and mechanical teams to ensure effective support of the existing development programmes and Antenna Systems.
  • Support product design, hardware integration, validation and handover to production with other Engineering team members.
  • Ensure the products are designed for EMC, Environmental and other regulatory approvals and meet the requirements for volume manufacturing (DFT/DFM).

Organisational responsibilities

  • Contribute to the company’s long-term goals by delivering right first-time hardware designs.
  • Take responsibility for delivery of quality hardware designs to tight timescales, contributing to planning sessions, design review and written reports when required.
  • Strongly self-motivated, creative and able to take ownership of problems and finding solutions.
  • Excellent communication skills and team working. Self-starter. Flexible can-do attitude.

Essential qualifications and skills

  • A good first or upper 2nd Class degree (BEng/MEng) in Electronic/Electrical Engineering from a leading University.
  • At least 3 years’ experience of complex high-frequency, low noise Analogue and RF circuit design in the data communications or aerospace industries in a product development environment.
  • Strong technical knowledge of Analogue and RF circuit design techniques from the specification, design and verification phases through to systems integration and manufacture.
  • Be able to demonstrate experience in the design and characterisation of mixed-signal (Analogue/Digital/RF) multi-layer PCB designs and the associated debug and integration issues.
  • Design knowledge, analysis and characterisation of circuits and systems involving PLLs, frequency synthesizers, NCOs, Modulators, De-Modulators, PAs, RF chains, filters, splitters/combiners and integrating them into board-level designs. Understanding of key performance parameters.
  • Experienced in high-speed impedance-controlled layouts for RF and mixed signal PCBs, defining stackups and associated constraints. Solid knowledge of high-speed layout techniques.
  • Competent with schematic capture tools, specifically Altium Designer and simulation tools such as TI-SPICE, HSPICE for analogue simulations. Knowledge of HFSS/ADS would be a bonus.
  • Ability to liaise with and manage PCB layout engineers, fabricators and assembly houses.
  • Knowledge of developing and implementing test plans and conducting practical measurements for the testing and evaluation of RF and mixed signal based designs.
  • Competent practical experience in the use of test equipment such as scopes, spectrum analysers, PNAs, VNAs, signal generators, power meters.
  • Creative, accurate, methodical with good problem-solving abilities. The ability to analyse the trade‐offs between performance, manufacturability, cost and user experience.
  • Good practical skills in electronics, soldering and mechanical assembly skills.


  • A good understanding of the complete product development process preferably for high-reliability environments, namely aerospace, marine or automotive products.
  • Knowledge of L-Band Modem circuit design would be a distinct advantage.
  • Knowledge of the product approvals process to meet CE, EN and the relevant product approvals (emissions, susceptibility, environmental) for the Aero (DO-160G) and marine markets.
  • Conversant with product design for EMC. DFM/DFT for volume manufacture.

All the benefits you'd expect from an industry leader

  • Competitive salary
  • Bonus scheme
  • Contributory pension
  • Life insurance at 4X annual salary
  • Flexible working
  • 25 days' holiday (plus recognised public holidays) and holiday purchase scheme
  • Season ticket loan
  • Cycle-to-work scheme
  • Training – continuing professional development to enable our people to succeed
  • Private Medical Insurance (PMI)
  • WeCare – access to 24/7 online GP

Overseas candidates welcome, generous relocation package

  • Sponsorship available on some roles – check vacancies
  • Visa application support and advice for you and your dependants
    • Full access to immigration consultant to assist with application process
    • Visa fees paid in full for employee + up to three dependants
  • Immigration health surcharge (IHS) covered for employee and up to three dependants for the length of the visa
  • Interest-free loans for employees with no prior UK residency – to help with essential purchases on arrival
  • Ongoing advice, support group and buddy scheme with other employees who have recently moved to the UK

London Technology Centre:

  • Based in modern, open-plan offices in the vibrant area of Hatton Garden, with great views of the City of London from several spacious balconies with outdoor seating.
  • Excellent transport connections: Farringdon, City Thameslink and Kings Cross St Pancras overground stations within walking distance; Chancery Lane and Farringdon tube stations within a five-minute walk.
  • Showers, cycle racks, lockers and a coffee shop on site. Workspace networking and social events throughout the year.
  • With the City, Covent Garden and Embankment close by, there's plenty to do at lunchtimes and after work.
  • Leather Lane street food market is right on our doorstep, with the usual chains close by.

For further information on how to future-proof your satcom solution, contact us here